






FAQ
Q: What is the difference between Hanboost C1 ultrasonic cutting knife and traditional cutting knife?
A: Ultrasonic cutting knives use high-frequency vibration for cutting, without the needfor traditional sharp blades. lt is suitable for cutting soft, elastic or viscous materials,while traditional cutting knives rely on physical pressure and sharp edges.
Q: What is the principle of ultrasonic cutting knife and whatmaterials is it suitable for cutting?
A: The principle of ultrasonic cutting knife is to use high-frequency vibration to achievecutting. This product supports a maximum frequency of 40kHz. When the tool comesinto contact with the material, this high-frequency vibration causes fatigue in themolecular structure of the material, thereby achieving cutting with almost no wearand heat generation. The ultrasonic knife can cut a variety of materials, includingpaper products, plastic materials (such as ABS, PE (polyethylene), acrylic). elasticmaterials (such as rubber silica gel), composite materials (such as FRP (fiberreinforced plastic) composite materials and plastic materials), chemical fibers, carbonfiber panels, hand 3D products, etc. lt has no improvement effect on most fabrics,soft rubber, sponges and other materials, and cannot be cut for most metal materials.
Q: How to extend the service life of ultrasonic cutting knives?
A: Avoiding contact between the blade and non food materials such as metal parts,proper use, and good maintenance habits can significantly extend the service life ofthe blade.
Q: Will the product generate heat during use, and is there anoverheat protection mechanism?
A: Due to the frictional heat generated by ultrasonic transducers and blades duringhigh-frequency vibration operations, this product is designed with a temperatureprotection mechanism. When the internal temperature of the equipment exceeds 60 degrees, temperature control protection will be triggered. At this point, it isnecessary to allow the product to cool naturally until the temperature drops, andthen restart it to ensure safety and continued use.
Q: How long can the cutting time last?
A: The product is equipped with 3 levels of power regulation function, with level 1providing the longest continuous working time, while level 3 is relatively short.The specific duration of work will be affected by the cutting material and the usageenvironment.
Q: What safety precautions should be taken when usingultrasonic cutting knives?
A:Operators are advised to wear appropriate personal protective equipment, such asgoggles, gloves, etc.Ensure proper power connection and avoid use in humid environments.Maintain hand stability and ensure that the cutting surface is perpendicular to thesurface of the object being cut.
Clean and store properly after use.
Q: What are the possible problems and solutions of ultrasoniccutting knives during the cutting process?
A: Poor cutting quality: Check for tool wear or improper settings.
Tool wear: Regularly replace tools and maintain.
Material deformation: Adjust cutting parameters such as speed and depth.
Low cutting efficiency: Check if the equipment needs maintenance or calibration.
Q: How to determine whether the ultrasonic cutting knife is working properly?
A: Observe the cutting effect: the cut should be neat and smooth.
Check the vibration: the cutter head should be obvious high-frequency micro-vibration.
Check the indicator: the equipment usually has a working status indicator light.
Q: ls the product waterproof?
A: This product does not have waterproof function, especially the Type-C interface atthe rear, which must avoid any contact or infiltration of moisture.